IMPORTANT:
Some parameters must be programmed in the camera:
• Video format: H.264
• Maximum bitrate: 256 Kbps
• Video resolution: QCIF, CIF, VGA (if it doesn't exceeds 256 Kbps)
Finally, after programming, button Register must be pressed.
Echo Control Settings
In the submenu:
Predefined Modes
Echo control can be disabled (Off) or preconfigured for different scenaries:
• Noisy Inside and Outside Rooms
• Noisy Outside
• Noisy Inside Room
• Low Inside and Outside Noise
The elements:
Speaker Level
Microphone Level
Speaker Attenuation
Microphone Attenuation
Allow to adjust functioning parameters with more precision; however the use of predefined
modes is preferred.
you can see the following elements to program:
Página 33 de 39
Manual de Portero IP v 9.0
SURiX IP Access
Versión de software (desde) 3.20