Tools And Materials; Before You Begin - Kohler K-4108BR Guia De Instalacion

Tools and Materials

Adjustable
Pencil
Wrench

Before You Begin

WARNING: Risk of electric shock, fire, or personal injury.
Voltage specifications for this bidet seat are on the label
located on the rear of the seat. Install the appropriate nominal
120 V or 220 V circuit with ground. The 120 V seat must be
protected by a Residual Current Device (RCD).
WARNING: Risk of electric shock. Do not immerse or flush
the product with water.
WARNING: Risk of property damage. Damaged water
connections may leak. Do not push or pull on the water
connection between the seat and the water supply stop.
NOTICE: To avoid possible product malfunction, do not plug in
the seat until instructed to do so.
NOTICE: Do not install this seat in a location where: (1) water
might be splashed on the product or (2) excessive moisture, high
humidity levels, or condensation are present. This will avoid
damage to the electronic components.
NOTICE: Do not use an extension cord with this product.
Observe all local plumbing, electrical, and building codes.
Only connect the seat to a cold water supply of drinking quality
water at a pressure of 139 kPa (20 psi) - 551 kPa (80 psi).
1194356-BR2-A
1.5 mm, 6.5 mm
Plastic Wrap
English-2
Kohler Co.