Technical Specifications - koban KDP6 Manual Del Usuario

KDP6
Wall presence detector

Technical specifications

Rated voltage
Load
lnstallation height
Detection Range
Lux Adjustment
Auto OFF Time
Delay
Meter adjustment
LED mode
Power
Consumption
Operating
Temperature
Environmental
Protection
Installation and assembly of electrical equipment must be carried
out by qualified electricians. Contact a qualified electrician in the
event of fault or break down.
Instructions manual |
230V~ 50Hz
Max.8A(cosφ=1)
lncandescent Lamp: Max. 1840W
HV Halogen Lamp: Max. 1000W
LV Halogen Lamp: Max. 300VA
Fluorescent Lamp: Max. 400VA
(Uncompensated)
2.0- 3.0M, recommended installation height is
approx. 2.5M
up to 270°
From " "(approx. 5LUX) to "
"Test", from "-"(approx. 6 sec) to "+"
(approx. 10 min) and "
Max. 10M
OFF / Warning / Watch
Approx. 1W
-20ºC to +45ºC
IP44
24
" (∞)
"
www.grupotemper.com