Ventilador Pie VP577_Maquetación 1 07/12/17 17:55 Página 17
- DO NOT dip the device in water or other liquids; in case the acci-
dental fall in the water DO NOT try to take it out, but first of all
unplug immediately the power cable from the socket.
- If you use the device for the first time, make sure to remove any
label or protective sheet which blocks its proper functioning.
- Plug and unplug the power cable with dry hands and hold it firmly.
- Before plugging make sure the start button of the device is in the
"OFF" position (turned off).
- Always unplug the power cable to avoid the overheating and avoid
stretching it (do not pull it, tug it or use it to drag the device to which
is connected).
- Avoid placing the power cable on abrasive or sharp surfaces or in
positions where it can be damaged easily.
- DO NOT obstruct totally nor partially the air vents or inserts objects
inside.
- During the functioning do not touch the device with wet body parts,
and in any case it is recommended to have between you and the
standing surface, an isolating element (for example wearing shoes
with rubber soles).
- During the use the device must be keep at a safety distance from
any object and/or flammable or potentially explosive substance.
- In case of malfunction or anomalies during the functioning, switch
off the device immediately, turn off the power and check the cause
of the anomalies, if possible, with the support of a qualified person.
Avoid carrying out operations which are not specified in this manual
(such as disassembling and/or altering).
- Always remember to unplug the power cable of the device if it is not
used for a long period, before storing, cleaning or performing any
maintenance operation.
- Store and use the device only indoor or in any case protected from
weathering such as rain, direct radiation of the sun and dust. The
device is not design for the external use or storage.
- The cleaning and maintenance of the device MUST NOT be done
by children without the supervision of an adult.
- Before unplugging the device, switch it off, using the proper com-
mand on the control panel.
- 17 -
E
N
G
L
I
S
H