Idiomas disponibles
Idiomas disponibles
Install Grip Heater (L) E.
1. Loosen the screw of balancer
with a + driver several turns
and pull the balancer assembly
out of the handlebars.
NOTE: Loosen the screw only
enough to remove the bal-
ancer. Otherwise, the bal-
ancer may disassemble
and
some
may remain in the handle-
bar.
2. Open the gap between the grip
and the handle with a - driver,
then inject degreasing agent to
pull out the grip.
NOTE: Use the - screwdriver
with care so as not to
scratch the surface of the
handlebar.
3. Spray the degreasing agent to
the outside of the handlebars
and wipe off the rest of adhe-
sive with a clean cloth.
4. Apply abundant grip cement
evenly inside Grip Heater (L) E
and handlebars.
components
Clean cloth
GENUINE SUZUKI ACCESSORIES
14/20
Handlebar
Degreasing
agent
Grip cement
Grip Heater (L)
