Starting The Engine; Starting The Machine - Grillo DUMPER 406 Uso Y Mantenimiento

HEIGHT of charging body: 435 mm
LOAD CAPACITY: 400 kg
SECURITY DEVICES: automatic handbrake
SPEED: I km/h 1 - II km/h 2 - III km/h 3.4 - I REVERSE km/h 1 - II REVERSE km/h 2 - III REVERSE km/h 3.4
OVERALL SIZE: Length 1610 mm
Width 780 mm
Height 1100 mm
TRACK EXTERNAL BULK: 650 mm
WEIGHT: 245 kg
INSTRUCTIONS FOR USE
Checks before starting.
– To check the engine oil, unscrew the level cap following the instructions in the engine manual.
sed air; it must be replaced if seriously clogged.
– Make sure that the gear lever is in neutral position.
backing off the lock-nut and tighten the crawler stretcher bolt.

STARTING THE ENGINE

After making the checks described:
the idling position.
Allow the engine to warm up for a few minutes before starting work, and to allow proper running-in do

STARTING THE MACHINE

Engage the gear required using the lever (2) Fig. 1. If the gear does not engage immediately, give light
touches on the clutch (1, Fig. 1).
Accelerate the engine using the throttle lever (4) Fig.1, and pull the clutch lever (Fig. 7A). The machine
will start. When the lever is released, the machine will stop (Fig. 7B).
FINISHING WORK
Return the throttle lever (4, Fig. 1) to the idling position. To stop the engine, bring the throttle lever to
stop position.
MAINTENANCE
The truck is designed to require very little maintenance. However, in order to keep it at top performance,
the following operations are advisable:
– oil the throttle, clutch and brake cables;
– never use mineral oil on rubber parts as it will damage them;
– check the crawler track tension.
9
-