Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4. Diagnostics
The EPB Service Tool is a multifunction solution specially designed to help technicians replace brake
pads more safely and efficiently. It is able to read/clear EPB/SBC trouble codes, deactivate/activate
SBC/EPB system, change brake fluid/bleed brake system, inspect brake air and set thickness of rear
brake calipers after changing brake discs & pads.
1. Turn the ignition off.
2. Release the park brake and make sure the car is
properly blocked.
3. Locate the vehicle's 16-pin Data Link Connector
(DLC.
4. Plug into the OBDII cable to the vehicle's DLC.
5. Turn the ignition on.
6. Press Y button from home screen to enter
Diagnostic Menu.
4.1 Diagnose EPB on Audi A8/A6 & Passat
The EPB Service Tool is able to open/close brake pads, read/clear EPB trouble codes on vehicles
that are equipped with EPB system. It can also enter thickness of rear brake calipers after changing
brake discs & pads on Audi A8 cars.
Reading Codes
1. Use UP/DOWN button to select EPB-Audi A8 or
EPB-Other VAG from Diagnostic Menu and press
Y button to confirm.
2. Use UP/DOWN button to select Read Codes
from Select Function menu and press Y button to
confirm.
3. View DTCs and their definitions on screen.
The sequence of the DTCs, total number of codes
detected and type of codes (stored or current will
be observed in the display.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
5
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Capítulos
Tabla de contenido
