13 Energy-Saving Mode; 14 Selecting The Temperature; Unit; Setting The Temperature Alarm - Beurer BY 110 Instrucciones De Uso

ing the correct frequency can help to reduce screen flickering with artificial
lighting�
To change the frequency, proceed as follows:
• Press the (
• Use the direction buttons (
• Use the direction buttons (
( 50 Hz or 60 Hz )� Confirm using the ( OK ) button�
7.13 Energy-saving mode
The parent unit has an energy-saving mode� When you activate the ener-
gy-saving mode, the screen switches off automatically, either after 2, 5 or
10 minutes, as desired�
To set the energy-saving mode, proceed as follows:
• Press the (
• Use the direction buttons (
• Use the direction buttons (
which the parent unit will automatically switch to energy-saving mode
( 2, 5 or 10 minutes )� Confirm using the ( OK ) button�
7.14 Selecting the temperature unit
You can set the device to display the room temperature in degrees Celsius
(°C) or degrees Fahrenheit (°F)�
To set the temperature unit, proceed as follows:
• Press the (
• Use the direction buttons (
• Use the direction buttons (
unit ( °C or °F )�
• Confirm using the ( OK ) button�
7.15

Setting the temperature alarm

Additionally, you can set a temperature alarm with an upper and lower limit�
If the current ambient temperature of the camera exceeds or falls short of
the set upper or lower limit, the parent unit will begin beeping�
) button�
) button�
) button�
) / ( ) to select menu item
) / ( ) to select your desired frequency
) / ( ) to select menu item
) / ( ) to select your desired duration, after
) / ( ) to select menu item
) / ( ) to select your desired temperature
38
�
�
�