Features; Technical Data; Operation Instructions; Continuous Operation - Surtek RR612 Manual De Instrucciones

FEATURES

KNOW YOUR TOOL
Before attempting to use this product, become
familiar with all of its operating features and
safety requirements.
7
6
5
1. SPEED DIAL SELECTOR
2. LOCK-ON FOR CONTINUOUS OPERATION.
3. IGNITION SWITCH.
4. PROTECTIVE GUARD.
5. CUTTING HEIGHT GAUGE.
6. PORT OF EXPULSION OF RESIDUES.
7. GRADUATED SCALE.

TECHNICAL DATA

RR612
VOLTAGE-FREQUENCY
NO LOAD SPEED
MAXIMUM CUTTING DEPTH
COLLET DIAMETER
POWER
WEIGHT
This router has the following features:
1. 1200 W Variable Speed Router motor, which
runs at 28,000 r/min (no-Ioad speed).
2. Variable Speed Dial for matching the speed to
the work piece material and bit size.
3. Electronic-Feedback Circuitry maintains con-
stant speed under load for a quality finish in all
materials.
4. Soft-start feature minimizes the torque twist
common with larger router motors by limiting
the speed at which the router motor starts. This
also increases the motor's life.
5. Spindle Lock for easy, one-wrench bit chang-
es.
6. 1/4 inch collets/nuts.
18
1
2
3
4
120 V ~ 60 Hz
(11 000 - 28 000) r/min
2-1/6" (55 mm)
1/4" (6.35 mm)
1 200 W
3,5 kg (7,71 lb)
7. Ergonomically designed handles with soft
grip for comfort and maximum control with less
vibration.
8. Durable, non-marring sub-base glide smooth-
ly over the work piece. The sub-base have a
cutter-bit opening of 1-1/4 in.
9. Impact-resistant router-motor top cap and
handles on base help protect the tool from dam-
age.
10. Heavy-duty Edge Guide for routing appli-
cations such as decorative edging, grooving,
dadoing, slotting, and straightedge planing /
trimming.

OPERATION INSTRUCTIONS

TURNING THE ROUTER ON AND OFF
For turning the router
'ON', press the trigger
switch. For turning the
router 'OFF' release the
trigger switch.

CONTINUOUS OPERATION

To lock the trigger switch on for continuous op-
eration, squeeze the trigger switch and hold it
while depressing the lock-on button. Hold the
button while you release the trigger switch and
the tool will continue to run. Squeeze and re-
lease the trigger switch to turn the tool off.

IMPORTANT:

1. Always hold the router and cutting bit away
from the work piece when turning the toggle
switch "ON."
2. Contact the work piece with the router
and cutting bit only after the router has fully
reached the selected speed.
3. Remove the router and cutting bit from the
work piece only after turning the router motor
"OFF," and after the cutting bit has come to a
complete stop.
VARIABLE SPEED CONTROL
The electronic speed control feature allows
router motor speed to be matched to cutter size
and work piece-material hardness for an im-
proved finish and extended bit life.
Speed changes are
made by rotating the
Speed Control Dial
starting at "MIN," and
the fastest speed is
marked with "MAX".