Features; Operation Instructions; "On/Off" Switch - Surtek RR616A Manual De Usuario

UNPACKING
WARNING: Your router should never be con-
nected to the power source when you are as-
sembling parts, making adjustments, installing
or removing collets/nuts or cutting bits, clean-
ing, or when it is not in use. Disconnecting the
router will prevent accidental starting, which
could cause serious personal injury.
1. Lift the base out of the case and place on a
flat surface.
2. Open the parts bag to locate the following:
• Edge Guide • 1/4 inch Collet/Nut
• Collet/Nut wrench
• 2 Sawdust-Extraction Hoods
• Depth-Adjustment Wrench
3. Inspect the items carefully to make sure that
no breakage or damage has occurred during
shipping.
WARNING: If any parts are broken or miss-
ing, do not attempt to plug in the power cord
or operate router until the broken or missing
parts are replaced. Failure to do so could result
in possibly serious injury.

FEATURES

KNOW YOUR TOOL
Before attempting to use this product, become
familiar with all of its operating features and
safety requirements.
IMPORTANT: Before attempting to use your
router, familiarize yourself with all of the oper-
ating features and safety requirements.
5
6
3
• Power Cord
1
2
4
E N G L I S H •
1. LOCK-ON FOR CONTINUOUS OPERATION
2. SPINDLE LOCK-ON
3. STRAIGHT CUTS GUIDE
4. GUARD
5. CUTTING HEIGHT GAUGE
6. SPEED DIAL SELECTOR
This router has the following features:
1. 1200 W Variable Speed Router motor, which
runs at 10,000 to 30,000 r/min (no-Ioad speed).
2. Variable Speed Dial for matching the speed
to the work piece material and bit size.
3. Electronic-Feedback Circuitry maintains con-
stant speed under load for a quality finish in
all materials.
4. Soft-start feature minimizes the torque twist
common with larger router motors by limiting
the speed at which the router motor starts.
This also increases the motor's life.
5. Spindle Lock for easy, one-wrench bit chang-
es.
6. 1/4 inch collets/nuts.
7. Ergonomically designed handles with soft
grip for comfort and maximum control with
less vibration.
8. Durable, non-marring
smoothly over the work piece. The sub-base
have a cutter-bit opening of 1-1/4 in.
9. Impact-resistant router-motor top cap and
handles on base help protect the tool from
damage.
10. Heavy-duty Edge Guide for routing appli-
cations such as decorative edging, grooving,
dadoing, slotting, and straightedge planing /
trimming.

OPERATION INSTRUCTIONS

"ON/OFF" SWITCH

This tool is equipped with a lock-off but-
ton to avoid unintentional
To switch "on", de-
press the lock-off but-
ton and squeeze the
trigger switch.
To switch "off", re-
lease the trigger
switch.
U se r' s m a nu a l
sub-base glide
starting.
19