Usb Configuration For Windows 2000 - Linksys Instant Broadband Serie Manual Del Usuario

5. A new window will appear, saying that Windows is now ready to install the
best driver for this device. Click Next to continue.
6. Windows will begin copying the files to your PC. Do not click Cancel or
press the Esc key during this process.
If Windows asks for your Windows operating system files before copying,
direct your PC to the location of those files, e.g, D:\Win98 or c:\win-
dows\options\cabs (assuming that your CD-ROM drive is named D).
7. Windows will notify you that it has completed copying the driver files to
your PC. Click Finish.
8. Windows will ask you if you want to restart your PC. Click Yes so your
new installation will take effect. If it does not ask you, go to Start, Shut
Down, then select Restart and click Yes.
Your USB configuration is now complete.
Continue on to the next section to
install the TCP/IP protocol.
8
Instant Broadband Series ®
EtherFast Cable/DSL Routers

USB Configuration for Windows 2000

1. Start up your PC and insert the driver disk into your floppy disk drive.
Windows will show a message notifying you that the PC has found new
hardware. Windows' Hardware Wizard will show a message stating that it
is ready to start installing the driver files to your PC. Click Next.
2. Select "Search for a suitable driver for my device (Recommended)" and
click Next.
9