Festo CPX-FVDA-P2 Traducción Del Manual De Instrucciones Original página 55

CPX-FVDA-P2
Functional characteristics
Module code
Sub-module code
Compatible with Fast Startup (FSU)
Startup time until module is ready
Diagnostics of external channel fault
Response time for external channel errors
Response time to shut-off command (typ.)
Internal PROFIsafe processing time (T
Tab. 9: Functional characteristics
Safety characteristics
Safety function
Switch off diagram per output channel
Internal response time to shut-off command
(T ) at the output channel CH0
WCDT
Internal response time to shut-off command
(T ) at the output channels CH1 and
WCDT
CH2 dependent on the minimum load
PROFIsafe watchdog time
Max. response time of the safety function
Max. cyclical request rate
Mean time to endangering failure (MTTF
Festo CPX-FVDA-P2-Z6 1209NH English
[min]
[ms]
) [ms]
DAT
1)
[ms]
[ms]
[rpm]
) [Years]
d
CPX-FVDA-P2
193d (C1h)
8d (08h)
Yes
< 2 s
– Cyclic check for function
– Cyclic check for external supply
– Cyclic check for cross circuit
< 1
< 10
< 50
Safe switch off of the output channels
– in accordance with IEC 61508 with
SIL 3
– in accordance with EN ISO 13849
with cat. 3, PL e
– in accordance with EN 62061 with
SIL CL 3
P- and M-switching
< 23
Load diagrams Fig. 7 and Fig. 8
F_WD_TIME
F_WD_TIME + T
WCDT
1
> 750
55