Booster And Double Booster Function; Timer - Foster 7330245 Manual Del Usuario

Booster and Double Booster function

Booster [ P ] and Double Booster [
If this function is activated the heating zones work during 10 minutes with an ultra high Power.
This is foreseen for example to heat up rapidly big quantities of water, like nuddles

Start up / Stop the Booster:
Action
Start up the Booster
Stop the Booster

Start up / Stop Double Booster
Action
Start up the Booster
Start up Double Booster
Stop the Double Booster
Stop Booster

Power management:
The hole cooking hob is equipped with a maximum of Power. When the Booster function is
activated, and in order to exceed the maximum Booster, the electronic system orders to reduce
automatically the power level of an other heating zone. The display is blinking on [ 9 ] during a
few seconds and then shows the maximum of power allowed:
Heating zone selected
[ P ] is displayed

Timer

The timer is able to be used simultaneous with all heating zones and this with different time
settings (from 0 to 999 minutes) for each heating zone.

Setting and modification of the cooking time :
Action
Select the power level
Select theTimer
Decrease the time
Increase the time
After a few seconds, the [ min ] display stops with blinking.
The time is confirmed and the timer starts.

To stop the cooking time:
Action
Select the Timer
Stop the time
If several timers are activated, repeat the process.
] grant a boost of Power to the selected heating zone.
Control panel
Slide to the end of the "SLIDER"
Or press directly on the end of
the "SLIDER"
Slide on the "SLIDER"
Control panel
Slide to the end of the "SLIDER"
Or press directly on the end of
the "SLIDER"
Re-press key [ P ]
Slide on the "SLIDER"
Slide on the "SLIDER"
The other heating zone:
[ 9 ] goes to [ 6 ] or [ 8 ] depending the type of zone
Control panel
slide on the "SLIDER"
Press simultaneously key [ - ] and [ + ] Timer display on
from the timer until the
desired display is on
Press key [ - ] from the timer
Press key [ + ] from the timer
Control panel
Press simultaneously key [ - ] and [ + ] Timer display on
from the timer until the
desired display is on
Press key [ - ] from the timer
26
Display
[ P ]
[ 9 ] to [ 0 ]
Display
[ P ]
[ and P ]
[ P ] to [ 0 ]
[ 9 ] to [ 0 ]
(example: Booster level 9)
Display
[ 1 ] to [ P ]
[ 60 ] to 59, 58...
Time increase
Display
[ 000 ]