Automatic Cooking; Stop&Go Function; Recall Function - Foster 7330245 Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 87
Egg timer function:
Egg timer is an independent function. It stops as soon as a heating zone starts up.
If the egg timer is on and the hob is switched off, the timer continues until time runs out.
Action
Activate the hob
Select the Timer
Decrease the time
Increase the time
After a few seconds, the [ min ] display stops with blinking.
The time is confirmed and the timer starts.
Automatic stop at the end of the cooking time:
As soon as the selected cooking time is finished the timer displays blinking [ 000 ] and a sound
rings.
To stop the sound and the blinking, press the key [ - ] and [ + ].

Automatic cooking

All the cooking zones are equipped with an automatic cooking device. The cooking zone starts at
full power during a certain time, and then reduces automatically its power on the pre-selected
level.
Start-up:
Action
Power level selection
(for example « 7 »)
Switching off the automatic cooking :
Action
Power level selection
Stop&Go function
This function brakes all the hob's cooking activity temporarily and allows restarting with the same
settings.
 Start up/stop the pause function :
Action
Engage pause
Stop the pause

Recall Function

After switching off the hob [ 0/I ], it is possible to recall the last settings.
 cooking stages of all cooking zones (Booster)
 minutes and seconds of programmed cooking zone-related timers
 Keep warm function
 Automatic cooking
The recall procedure is following:
 Press the key [ 0/I ]
 Then press [ II ] before the light stops blinking.
The previous settings are again active.
Control panel
press display [ 0/I ]
Press simultaneously key [ - ] and [ + ] [ 000 ]
from the timer
Press key [ - ] from the timer
Press key [ + ] from the timer
Control panel
slide on the "SLIDER" to [ 7 ]
and stay 3s
Control panel
slide on the "SLIDER"
Control panel
press [ II ]
press [ II ]
Press on the animated "slider"
27
Display
[ 0 ]
[ 60 ] to 59, 58...
Time increase
Display
[ 7 ] is blinking with [ A ]
Display
[ 0 ] to [ 9 ]
Display
[ II ] and control light on
"Slider" animated
previous settings
Tabla de contenido
loading

Tabla de contenido