The "Come" Command - Petsafe PDT20-10715 Manual De Adiestramiento Y Funcionamiento

The "Come" Command

1. Put a separate, non-metallic collar on your
pet's neck ABOVE the Receiver Collar, and
attach a 3 metre lead. Note: Be sure the extra
collar does not put pressure on the Contact Points.
2. Hold your lead in one hand and the Remote
Transmitter in the other.
3. Wait for your pet to walk away from you.
4. Press and hold the Side Button to send an
Audible Tone to your pet while saying "Come"
and if necessary use the lead to guide your pet
toward you.
5. Immediately release the Side Button as soon
as your pet steps toward you, and praise him
enthusiastically.
6. Quickly move backwards as your pet begins
to come toward you, praising him the entire
time. Stop moving backwards and praise your
pet when he returns to you.
7. Repeat steps 3 to 6 several times.
8. If your pet comes to you reliably on receiving
the Audible Tone and the spoken "Come"
command, then training is complete. Release
your pet and praise him. If not, move on to
Step 9.
9. Wait for your pet to walk away from you.
Using the Recognition Level for your pet,
press and hold the Upper Button to send an
Audible Tone and Stimulation to your pet
while saying "Come" and if necessary use the
lead to guide your pet toward you.
10. Immediately release the Upper Button as
soon as your pet steps toward you, and praise
him enthusiastically.
11. Quickly move backwards as your pet begins
to come toward you, praising him the entire time. Stop moving backwards and praise your pet
when he returns to you.
12. Repeat steps 9 to 11 several times.
13. If your pet now comes to you reliably on receiving the Audible Tone and Stimulation with the
spoken "Come" command, he may now be ready to respond without Stimulation. Take a play
break and then go back and repeat from Step 3 with Audible Tone only.
14 www.petsafe.net