Tabla de contenido
Idiomas disponibles
Idiomas disponibles
-
Delicately hand-wash in lukewarm water (max. 30° C) and neutral soap.
-
Rinse with cold water and allow drying at room temperature, away from direct sunlight.
-
Never machine-wash the inner comfort padding.
-
The inner polystyrene is an easily deformable material. It is apt to change or get partially destroyed to help absorb
shocks.
-
Do not modify or alter the helmet's internal polystyrene components in any way.
-
Clean the inner components with a damp cloth only and allow it to dry at room temperature away from direct sun-
light.
-
Never use tools or equipment of any sort to carry out the steps described above.
HELMET LOCK RING
Some versions of this helmet feature a metallic ring called HELMET LOCK RING (Fig. 17), that can be used for hanging
the helmet to the special hook placed on many motorbikes.
WARNING
-
Only use the HELMET LOCK RING to hang the helmet to the motorbike.
-
Check that - when hung to the hook- the helmet is not directly exposed to heat sources or other stresses that may
modify its characteristics or damage it.
-
the HELMET LOCK RING is not related to the helmet retention system (strap) and/or its adjustment (see specific
instructions).
-
Never use the HELMET LOCK RING to fasten the helmet to the head and/or to adjust the tension (see instructions
above).
-
Do not remove the HELMET LOCK RING form the retention system strap.
-
In case of malfunctioning or damages, please contact an authorised Nolan dealer.
-
Delicately hand-wash in lukewarm water (max. 30° C) and neutral soap.
-
Rinse with cold water and allow drying at room temperature, away from direct sunlight.
-
Never machine-wash the inner comfort padding.
-
The inner polystyrene is an easily deformable material. It is apt to change or get partially destroyed to help absorb
shocks.
-
Do not modify or alter the helmet's internal polystyrene components in any way.
-
Clean the inner components with a damp cloth only and allow it to dry at room temperature away from direct sun-
light.
-
Never use tools or equipment of any sort to carry out the steps described above.
HELMET LOCK RING
Some versions of this helmet feature a metallic ring called HELMET LOCK RING (Fig. 17), that can be used for hanging
the helmet to the special hook placed on many motorbikes.
WARNING
-
Only use the HELMET LOCK RING to hang the helmet to the motorbike.
-
Check that - when hung to the hook- the helmet is not directly exposed to heat sources or other stresses that may
modify its characteristics or damage it.
-
the HELMET LOCK RING is not related to the helmet retention system (strap) and/or its adjustment (see specific
instructions).
-
Never use the HELMET LOCK RING to fasten the helmet to the head and/or to adjust the tension (see instructions
above).
-
Do not remove the HELMET LOCK RING form the retention system strap.
-
In case of malfunctioning or damages, please contact an authorised Nolan dealer.
9
9
Tabla de contenido
