Technical Specifications; Packing List; Standard Package Content; Introduction - Selecta MACROTRONIC BLT Manual De Instrucciones

INSTRUCTION MANUAL
Code:
Dimensions (mm): (Height/Width/Depth)
Power (W):
Max speed (rpm):
Max RCF.:
Weight (kg):
FREE SPACE AROUND CENTRIFUGE
Safety zone:
Leave a free space of 30 cm. around
the centrifuge.
With the centrifuge running:
• Do not place hazardous substances in
the security area.
• The staff should be outside the safety
area.
J
.P. SELECTA s.a.u.
CODE 80316

3 Technical specifications

Voltage supply 115/230V 50/60 Hz as indicated in the
machine's features plate.
7001476
380x460x520
520
11000
25470 (Depending on the rotor)
44

4 Packing List

4.1

Standard package content

The standard equipment consists of the following components:
- Centrifuge MEDIFRIGER/MACROFRIGER BLT
- Centrifuge MEDITRONIC/MACROTRONIC BLT
- Network connection cable
- Rotor nut wrench
- Drainage nipple in refrigerated models
- Instructions manual

5 Introduction

The centrifuge has an induction motor maintenance free and a maximum noise level
of 60 dBA. It has an internal security camera and a bucket, stainless steel cover.
The electronic circuit is controlled by a microprocessor that controls the operating
parameters: speed, acceleration, braking, RCF, operating time and temperature on
models 7001486/7001477. It can store up to 10 operating programs.

6 Installation

6.1

Location

• Place the equipment near a power socket suitable for consumption and over a flat
level surface and strong enough to support the equipment weight and possible
vibrations.
• The surface must allow the adherence of the centrifuge legs.
• Leave a free space of 30 cm. around it (see danger indication).
• This equipment can cause vibrations that could affect other nearby equipments.
• Do not install the centrifuge near heat sources or in places where it is exposed
to direct sunlight, as this may affect temperature regulation.
• Place the nipple provided in outlet (16) and connect to a hose to drain conden-
sates.
• Equipments with wheels, ensure that they are braked prior to start-up.
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
e-mail: [email protected] - website: http://www.jpselecta.es
REV C
7001477 7001485
380x680x520 450x600x660
1230 720
15000 10000
11066
70 76
Tel 34 937 700 877 Fax 34 937 702 362
05/2020 Page: 11
7001486
970x600x660
1230
12000
15935
156
7001477/7001486
7001476/7001485
7140
5377
80316