Technical Features - Selecta L-4 CABINET Manual De Instrucciones

1.5.Technical features

Code
L-4 CABINET
1.6.Assembly
1. Be sure that heater elements (washer of
silicone rubber and PBTP nut) are in the
order and position that the photo shows.
2. Insert the heaters through the screw mouth.
3. Connect the end wiring of the heaters to
the corresponding sockets.
Rev. 010612
Code Length
(cm)
L-4 CABINET 55
Output Conductivity
(lts/h) at
20 ºC
4 2 µS / cm
Width Height Weight
(cm) (cm) (Kg)
22 40
Water Consumption
comsumption (W)
(l/min)
1,4 2 x 1500
4. Put the water inlet tube on the inlet still.
5. Be sure of putting the filter, of tightening
and connecting the other end to the tap.
6. Be sure that the silicone tubes hold suitable
position to let water pass and to avoid
water pressures.
7. Be sure that the level sensor is connected.
12
Voltage Intensity
(V) (A)
230 13
Pag: 5