Troubleshooting; Maintenance And Service - Valkee 2 Guía Del Usario

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 147

2.5. TROUBLESHOOTING

ERROR CONDITION : The device gives an error
signal (four beeps and four flashes of the indica-
tor lights) if the Ledset becomes disconnected
or broken. To rectify the error, make sure
that the Ledset is properly connected to the
main unit and/or that the Ledset earplugs and
Ledset wires are not broken. If the error per-
sists, contact Valkee.

2.6. MAINTENANCE AND SERVICE

See "Technical Information" for appropriate
environments for operation, transportation
and storage.
CLEANING: The device is intended for personal
use only. Clean the earplugs and silicone fit-
tings between uses with a non-abrasive, dry
cleaning cloth. Never use abrasive cleaning
agents or strong detergents to clean the de-
vice, and do not rinse it with water.
STORAGE: Store the device between uses or
during potential idle periods in a protective
case or bag in a dry location.
SERVICE AND REPAIR: Contact
[email protected] with any warranty, service
or support issues.
Valkee
at
47
loading

Productos relacionados para Valkee 2