Protection And Errors; Errors That May Require User Intervention - Espa SPEEDRIVE V2 Manual Del Usuario

DISPLAY OF THE ALARM LOG DISPLAY OF THE ALARM LOG
DISPLAY OF THE ALARM LOG DISPLAY OF THE ALARM LOG
The Speedrive counts the number of times an alarm has been activated.
Only for operation information.
From any screen, tap OK to return to the main screen 2.1 From any screen, tap OK to return to the main screen 2.1
From any screen, tap OK to return to the main screen 2.1 From any screen, tap OK to return to the main screen 2.1
DISPLAY OF THE OPERATION LOG DISPLAY OF THE OPERATION LOG
DISPLAY OF THE OPERATION LOG DISPLAY OF THE OPERATION LOG
The Speedrive remembers its history.
From any screen, tap OK to return to the main screen 2.1 From any screen, tap OK to return to the main screen 2.1
From any screen, tap OK to return to the main screen 2.1 From any screen, tap OK to return to the main screen 2.1

6) PROTECTION AND ERRORS.

6) PROTECTION AND ERRORS. 6) PROTECTION AND ERRORS. 6) PROTECTION AND ERRORS.
Risk of electrocution
DANGER.
DANGER: The failure to follow the instructions in this Manual can lead to motor overloads, diminishment
in technical characteristics, reduction of the unit's working life and all types of subsequent results, for
which we decline any responsibility.
The Speedrive has several built-in protection devices to protect its integrity against different operational failures.
If a fault occurs, the error appears on the screen and, in some cases, the Speedrive tries to restore operations.
Other cases require user intervention to restart.
WARNING: In both cases, even if operations are restored, you should inform your technical service so
they can review the unit and the installation.

6. 6. 6. 6.1) Errors that may require user intervention:

1) Errors that may require user intervention: 1) Errors that may require user intervention: 1) Errors that may require user intervention:
OVERCURRENT
ERROR
INST.MAX.CURR.
ERROR
DISPLAY ALARMS DISPLAY ALARMS DISPLAY ALARMS DISPLAY ALARMS
Press OK OK to confirm.
OK OK
To display the log, press ◄ (Hist)
To display the parameters, press ► (Param)
DISPLAY LOG DISPLAY LOG DISPLAY LOG DISPLAY LOG
Press Ok to confirm.
To display the alarms, press ► (Alarm)
. Never open the Speedrive cover.
OVERCURRENT OVERCURRENT OVERCURRENT OVERCURRENT
The circuit permanently controls the motor's current consumption. If the current
exceeds the values established in parameter "MAXIMUM MOTOR CURRENT" at any
moment, the system will stop.
The reset is automatic. If the error is not solved 4 new attempts* are performed.
If the error is still present after the fourth attempt, the system will be set to a
permanent fault.
Press OK to reset. The start screen (#2) will appear. Press OK to reset. The start screen (#2) will appear. Press OK to reset. The start screen (#2) will appear. Press OK to reset. The start screen (#2) will appear.
INSTANTANEOUS MAXIMUM INTENSITY INSTANTANEOUS MAXIMUM INTENSITY
INSTANTANEOUS MAXIMUM INTENSITY INSTANTANEOUS MAXIMUM INTENSITY
The unit stops if an excessive current consumption spike is detected.
It automatically resets. If the error persists, it will retry 4 times*.
If the error persists after the fourth try, the unit will go into permanent failure.
Press OK to reset. The start screen (#2) will appear. Press OK to reset. The start screen (#2) will appear. Press OK to reset. The start screen (#2) will appear. Press OK to reset. The start screen (#2) will appear.
- 18 -