Nice Rondo RN2010 Manual Del Usario página 6

safe and reliable activation. However, children should not be allowed
to play in the vicinity of automated systems; to prevent any accidental
activations, keep all remote controls away from children: they are
not toys!
• Malfunctions. If you notice that your automation is not functioning
properly, disconnect the power supply to the system and operate the
manual release device. Do not attempt to make any repairs; call the
installation technician and, in the meantime, operate the system like
a non-automatic gate after releasing the gearmotor as described
below.
• Maintenance. Like any machine, your automation needs regular
periodic maintenance to ensure its long life and total safety. Arrange
a periodic maintenance schedule with your installation technician.
Nice recommends that maintenance checks be carried out every six
months for normal domestic use, but this interval may vary depend-
ing on the intensity of use. Only qualified personnel are authorized to
carry out checks, maintenance operations and repairs.
1
1. Turn the bottom knob clockwise to loosen it until you feel a certain resistance; (Fig. 1)
2. Open or close the rolling gate manually;
3. Lock the gearmotor again by turning the bottom knob counter-clockwise until the two knobs are in contact with each other.
(Fig. 2)
Important: if your system is equipped with a radio control that, after a
period of time, seems not to work as well, or not to work at all, it may
simply be that the battery is exhausted (depending on the type of bat-
tery, it may last from several months up to two or three years). In this
case you will see that the light confirming the transmission is weak, or
does not come on, or comes on only briefly. Before calling the installa-
tion technician try exchanging the battery with one from another operat-
ing transmitter: if the problem is caused by a low battery, just replace it
with another of the same type.
6
• Do not modify the system or its programming and adjustment para-
meters in any way, even if you feel capable of doing it: your installation
technician is responsible for the system.
• The final test, the periodic maintenance operations and any repairs
must be documented by the person who has performed them; these
documents must remain under the custody of the owner of the system.
• Disposal. At the end of its useful life, the automation must be dis-
mantled by qualified personnel, and the materials must be recycled or
disposed of in compliance with the legislation locally in force.
• In the event of malfunctions or power failures. While you are
waiting for the technician to come (or for the power to be restored if
your system is not equipped with buffer batteries), you can operate
the system like any non-automatic gate. In order to do this you need
to manually release the gearmotor: this operation, which is the only
one that the user of the automation is authorized to perform, has been
carefully designed by Nice to make it extremely easy, without any need
for tools or physical exertion.
2
Are you satisfied? If you wish to install another automation system in
your home, call your old installation technician and use Nice products.
You will get the services of a specialist and the most advanced products
available on the market, superior performances and maximum system
compatibility.
Thank you for reading these instructions. We feel confident that you will
be well satisfied with your new system. For any present or future require-
ments, please contact your reliable installation technician.