Adding A Track Mark; Erasing A Track Mark - Sony Walkman MZ-S1 Manual De Instrucciones

Adding a track mark

You can add track marks so that the part
after the new track mark is counted as a
new track. The track numbers will
increase as follows:
You cannot add a track mark on a track
that has been checked-out from your
computer.
1 2
Add a track mark
1 2 3
Track numbers increase
T MARK
1
While playing or pausing an MD,
press T MARK on the recorder at the
point you want to mark.
"MK ON" appears in the display, and
a track mark is added. The track
number will increase by one.
To add track marks while
recording (except while
synchro-recording)
Press T MARK on the recorder at the
point you want to add a track mark.
You can use Auto Time Stamp to add
track marks automatically at specified
intervals (except while digital recording)
(page 32).
3 4
4 5

Erasing a track mark

When you record with analog (line) input,
unnecessary track marks may be recorded
where recording level is low. You can
erase a track mark to combine the tracks
before and after the track mark. The track
numbers will change as follows:
You cannot erase a track mark on a track
that has been checked-out from your
computer.
1 2
Erase a track mark
1 2
Track numbers decrease
Control key
(.)
X
1
While playing the track with the track
mark you want to erase, press X to
pause.
2
Find the track mark by pressing .
slightly.
For example, to erase the third track
mark, find the beginning of the third
track. "00:00" appears in the display.
"MK 003" appears in the display for
2 seconds.
3
Press T MARK to erase the mark.
"MK OFF" appears in the display.
The track mark is erased and the two
tracks are combined.
3 4
3
T MARK
45
-GB