Kollmorgen MKD-C Manual Del Usuario página 166

MKD Product Safety Guide | 8 Appendix
166 Kollmorgen | kdn.kollmorgen.com | July 2019
Code Fault/Warning
F240 Control under temperature sensor 1.
F241 Power under temperature sensor 1.
F242 Power under temperature sensor 2.
F243 Power under temperature sensor 3.
F246 Power under temperature sensor 4.
F305 Brake open circuit.
F501 Bus over voltage.
F503 Bus capacitor overloaded.
F519 Regen short circuit.
F521 Regen over power.
F523 Bus over voltage FPGA.
F531 Power stage fault.
F536 Standby power supply fault.
F537 Precharge fault.
F541 AC input phase 1 missing.
F542 AC input phase 2 missing.
F543 AC input phase 3 missing.
F545 String current over peak limit.
F546 String current over continous limit.
F561 Too many nodes connected on string 2.
F562 Too many nodes connected on string 1.
F563 Too many nodes connected on string 3.
F564 Number of connected nodes on string 1 has decreased.
F565 Number of connected nodes on string 2 has decreased.
F567 Number of connected nodes on string 3 has decreased.
F568 String 1 current over peak limit.
F569 String 2 current over peak limit.
F571 String 3 current over peak limit.
F572 String 1 current over continuous limit.
F573 String 2 current over continuous limit.
F574 String 3 current over continuous limit.
F576 String 1 desaturated.
F578 String 2 desaturated.
F579 String 3 desaturated.
F580 String 1 over current.
F581 String 2 over current.
F582 String 3 over current.
F583 Rectifier desaturated.
F584 Total string current over peak limit.
F587 All AC input phases lost while drive was enabled.
F621 Control board CRC fault.
F623 Power board CRC fault.
F624 Power board watchdog fault.
F625 Power board communication fault.
F626 Power board FPGA not configured.