Replacing The Lamp Wine Cellar - AEG SWD81800G0 Manual De Instrucciones

Problem
Water flows on the
ground.
The temperature in the ap-
pliance is too low.
The temperature in the ap-
pliance is too high.

Replacing the lamp Wine Cellar

1. Disconnect the mains plug from the mains socket.
2. Remove the lamp cover by pressing it in-
wards with a tool (e.g. screwdriver) to
free the rear side hookings.
All manuals and user guides at all-guides.com
Possible cause
The melting water outlet does
not flow in the evaporative tray
above the compressor.
The temperature regulator is
not set correctly.
The temperature regulator is
not set correctly.
The door is not closed correctly. Refer to "Closing the door".
The product temperature is too
high.
Many bottles are stored at the
same time.
There is no cold air circulation
in the appliance.
What to do if...
Solution
Attach the melting water outlet
to the evaporative tray.
Set a higher temperature.
Set a lower temperature.
Let the product temperature de-
crease to room temperature be-
fore storage.
Store less bottles at the same
time.
Make sure that there is cold air
circulation in the appliance.
33