Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Problem
Upper or lower square is
shown in the temperature
Display.
Replacing the lamp Wine Cellar
1.
Disconnect the mains plug from the mains socket.
2.
Remove the lamp cover by pressing it
inwards with a tool (e.g. screwdriver) to
free the rear side hookings.
At the same time, free the middle hook
and slide off the cover in the direction
of the arrows.
3.
Replace the used lamp with a new lamp
of the same type and specifically de-
signed for household appliances and
having the same characteristics.
4.
Install the lamp cover.
5.
Connect the mains plug to the mains
socket.
6.
Open the door. Make sure that the lamp
comes on.
Closing the door
1.
Clean the door gaskets.
2.
If necessary, adjust the door. Refer to "Installation".
Possible cause
An error has occurred in meas-
uring the temperature.
What to do if...
Solution
Call your service representative
(the cooling system will continue
to keep food products cold, but
temperature adjustment will not
be possible).
35
Capítulos
Tabla de contenido
