Tabla de contenido
Idiomas disponibles
Idiomas disponibles
STEAM FEATURES
WARNING:
"Do not open the dryer
door during
Steam Cycles.
Steam
can cause severe burns.
"Do
not flli the steam feeder
with gasoline,
dry cleaning
solvents, or other flammable
or explosive
substances.
They give off vapors that could explode.
"Do
not drink water from the steam
feeder.
* Do not fili the steam feeder
with hot water (over
86°F/30"C}.
* Do not touch the steam
nozzle
in the drum during or
after the steam cycle.
IMPORTANT NOTES ABOUT STEAM FUNCTIONS:
* Steam may not be clearly visible during the steam
functions. This is normal
"Do not use Steam Refresh with items such as wool,
wool blanketst leather jackets, silk, wet clothes, lingerie,
foam products, or electric blankets.
- For best resuJts_load articles of similar size and fabric
type. Do not overload.
* if the home's exhaust system is restricted, the
performance of the steam functions will be reduced.
* During steam operation, the clothes witt tumble for
only a few seconds, once a minute.
"The steam feeder must be filled with water up to the
MAX line. Otherwise, the ADD "WATERlight
may illuminate.
Using the STEAM REFRESH cycle
The Steam Refresh cycle uses the power of steam to
quickly reduce wrinkies and odor in fabrics, it brings
new life to wrinkled clothes that have been stored for
an extended period of time, and it can make heavily
wrinkled clothes easier to iron. STEAM REFRESHcan
also be used to help reduce odors in clothes, such as
ctothes that were worn in a room where people had
been smoking. This cycle can refresh from one to five
garments, or one bulky item such as o comforter.
There
are three settings available.
Use 3 for one to three
garments and _ for four or five garments. The b t9
(big) setting should be used for bulky items. Best results
are achieved with 70/30
cotton/poryblend fabrics.
NOTE: The STATIC SHIELD option can be used together
with the STEAM REFRESHcycle to help prevent
static electricity after the cycle.
Turn the dryer ON and select the STEAM REFRESH
cycle.
Select the STATIC SHIELD option, if desired.
The default number of garments is three. Press the
MORE TIME or LESS TiME button to adjust the load
size, as described above.
Press the START/PAUSE button to start the cycle.
STATIC SHIELD
J
......................................
This option uses steam late in the drying
Static Shietd
cycle to reduce the static electricity
caused by dry fabrics rubbing together.
Change the steam time by pressing the MORE TIME
and LESS TIME buttons to display the approximate
number of articles in the load: 7_9, 11, 14, 16 or 18.
NOTE: When STATIC SHIELD is added to auto dry
cycles, the Damp Dry level cannot be selected.
iRON READY
Iron Ready
The Iron Ready option provides uniform,
properly dampened
fabrics for ironing,
which can save time and make ironing
Static Shie!d
easier. Change the steam time by pressing
the MORE TIME or LESS TIME button,
depending
on the number of garments in the load: 1, 2,
3, 4, or 5.
Press and hold the STATIC SHIELD button for three
seconds to access the iron Ready function.
NOTE: After the STATIC SHIELD or IRON READY op-
tion is selected in timed dry cycles, the MORE TfME and
LESS TIME buttons will change the number of garments,
as described above. After the cycle has started, the
MORE TiME and LESS TIME buttons are disabled.
26
Capítulos
Tabla de contenido
