Tabla de contenido
Idiomas disponibles
Idiomas disponibles
CYCLE STATUS LIGHTS
1
Lights indicate the progress of the drying cycles.
DRYER CYCLE KNOB
2
Use your Dryer Cycle Knob to select available cycles on your
dryer. Turn the knob to select a cycle for your laundry load.
See "Cycle Guide" for detailed descriptions of cycles.
EvenHeat™ Auto Dry
with Auto Moisture Sensing Control
Auto Dry cycles give the best drying in the shortest time.
Drying time will vary based on fabric type, load size, and
dryness setting.
Time Cycles
Will run the dryer for the specified time on the control.
Press the Dry Temp button to change the drying temperature
from the default setting, if desired. Press the Less Time or
More Time buttons to change the drying time from the
default setting, if desired.
Time Dry
Default dry time setting is 40 minutes.
Express Dry
Default dry time setting is 23 minutes.
OPTIONS AND SETTINGS
3
Dry Temp (for use with Time cycles only)
Select a drying temperature based on the fabrics in
your load. If you are unsure of the temperature to select
for a load, select the lower setting rather than the higher
setting. See "Cycle Guide".
NOTE: The Air Only Temp Feature is not available on the
Auto Dry Cycles.
Dry Level (for use with EvenHeat™ Auto Dry
Cycles only)
Use with Auto Dry cycles to select the desired dryness level.
See "Cycle Guide".
CONTROL PANEL AND FEATURES
1
5
Not all features and options are available on all models.
Appearance may vary.
2
4
Wrinkle Guard™ Feature
When you are unable to remove a load of clothes from the
dryer as soon as it stops, wrinkles can form. The WRINKLE
GUARD™ feature periodically tumbles, rearranges, and fluffs
the load to help keep wrinkles from forming.
WRINKLE GUARD™ gives you a period of heat-free,
n
periodic tumbling at the end of a cycle. Some models
provide two time choices (60 or 150 minutes), other
models provide only one time choice (90 minutes). Press
the WRINKLE GUARD™ button to turn On or Off at
any time before the cycle has ended.
Cycle Signal
The Cycle Signal produces an audible sound when the drying
cycle is finished. Promptly removing clothes at the end of the
cycle reduces wrinkling.
Press CYCLE SIGNAL until the desired volume (Off, Low,
or High) is selected.
NOTE: When the Wrinkle Guard™ setting is selected
and the Cycle Signal is on, the tone will sound every
20 minutes until the clothes are removed, or the Wrinkle
Guard™ setting ends.
Damp Signal (for use with Evenheat™ Auto Dry
Cycles only)
Selecting the Damp Dry Signal will alert you when your
clothes are approximately 80% dry. This is useful when
you want to remove lightweight items in a mixed load
to avoid overdrying or remove partially dry items that
may need ironing.
START/PAUSE BUTTON
4
Press START/PAUSE to start a cycle, or press START/PAUSE
once while a cycle is in process to pause it.
POWER BUTTON
5
Press to turn the dryer on and off.
3
5
Tabla de contenido
Solución de problemas
