Kenmore 796.8158 Manual De Uso Y Cuidado página 6

SAFETY iNSTRUCTiONS FOR STEAM FUNCTIONS
A WARN ING: To reduce the r isk o f f t.,, e loctric sh=k, orinjury toPe.o.. w ho. usi.g t hl, a pp,onc.,
follow baste precautions, including the following:
• Do no| open the dryer door during steam cycles.
Failure to follow these instructions con result in a
burn hazard.
* De no# dry articles that have been previously cleaned
in, washed in, soaked in, or spotted with gasoline,
dry-cleaning solvents, or other flammable or explosive
substances, as they give off vapors that could ignite or
exptode. Fa!lure to follow these instructionscan result in
fire or death.
"Do not 011the steam feeder with gasoline, dry=
cleaning solvents, or other flammable or explosive
substances. Failure to follow these instructions can
result in fire or death.
"Do not touch the steam nozzle in the drum during
or after the steam cycle. Failure to follow these
instructions can result in a burn hazard.
• Do not fill the steam feeder with hot water (over
86°F/30°C). Failure to follow these instructions can
result in a burn hazard.
SAFETY INSTRUCTIONS FOR CONNECTING ELECTRICITY
A WARN iNG:
To reduce the risk of fire, eledric shock, or injury to persons when using this appliance,
follow basic precautions, including the following:
Do not, under any circumstances, cut or remove
the ground prong from the power cord. To prevent
personal injury or damage to the dryer, the electrical
power cord must be plugged into a properly
grounded outlet.
• Far personal safety, this dn/er must be properly
grounded. Failure to do so can result in electrical
shock or injury.
"Refer to the installation instrucflons in thls manual
for specific electrical requirements for your model
Failure to foffow these instructionscan create an
electrical shock hazard and/or a fire hazard.
* This dryer must be plugged into a properly grounded
outlet. Electrical shock can result if the dryer is not
properly grounded. Have the wall outlet and circuit
checked by a qualified elecfrlcian to make sure the
outlet is properly grounded. Failure to follow these
instructions can create an electrical shock hazard
and/or a fire hazard.
* The dryer should always be plugged into its own
individual electrical outlet which has a voltage rating
that matches the rating plate. This provides the best
performance and also prevents overloading house
wiring circuits which could cause a fire hazard from
overheated wires.
• Never unplug your dryer by pulllng on the power
cord. Always grip the plug firmly and pull straight
out from the outlet. The power cord can be damaged,
resulting in a risk of fire and electrical shock.
* Repair or replace immediately all power cords that
have become frayed or otherwise damaged. Do nat
use a cord that shows cracks or abrasion damage
along its length or at either end. The cord can
and/or p°wer
melt, creating electrical shock fire hazard.
* When instaJling or moving the dryer, be careful not
to pinch, crush, or damage the power cord. This will
prevent injury and prevent damage to the dryer from
fire and electrical shock.
SAVE THESE iNSTRUCTiONS
6