Tools Required; Product Specifications - BRASS Akron STYLE 3600 Instrucciones De Instalación Y Operación

INSTALLATION AND OPERATING INSTRUCTIONS
The following is intended to provide the basic instructions for installation and operation of the Wireless Remote Control (WRC), and to assist in attaining
the best possible performance from the unit. Read and understand these operating instructions before use.

TOOLS REQUIRED

• Medium Phillips screwdriver
• Small slotted screwdriver
PRODUCT WARNINGS AND CAUTIONS
WARNING: For firefighting use by trained fire fighters.
WARNING: The WRC will not operate without a Receiver connected to the logic box.
WARNING: Do not use the WRC when the override cranks are being used or are in position for use.
WARNING: Do not stow the monitor when flowing water.
WARNING: Although the enclosures for the controller and receiver are water-resistant, it is important to keep water out of the enclosure.
Prolonged exposure to water will cause damage. When the cover of the enclosure is removed, make sure the O-ring under the
cover is intact and free of dirt and debris.
WARNING: Replace the identification tags if they should become worn or damaged.
CAUTION: To satisfy FCC RF exposure requirements for mobile transmitting devices, a separation distance of 20 cm or more should be
maintained between the antenna and persons during device operation. To ensure compliance, operations at closer than this
distance is not recommended. The antenna used for this transmitter must not be co-located in conjunction
with any other antenna or transmitter.

PRODUCT SPECIFICATIONS

Handheld Controller
• Input Power Requirement: Two 1.5V lithium AA batteries*
• Controller Power: Asleep (1 mW), Idle (75 mW), Transmitting (300 mW)
• Battery Life: 20 continuous hours
• RF Output Power: 63 mW (meets FCC part 15 requirement for license free operation)
• Operating Frequency: 2.4 GHz or 900 MHz (see label for frequency)
• FCC ID: OUR-XBEEPRO for 2.4 GHz, or MCQ-XBEE09P for 900 MHz
• Operational Range: Up to 300 feet
• Controller Dimensions: 6¼" x 3½" x 1¾"
• Controller Weight: ¾ lb.
• Operating Temperature Range: −40°F to +140°F (−40°C to +60°C)
* Early models used one 3V CR123 or equivalent lithium battery
Receiver
• Input Power Requirement: 12 or 24 VDC
• Receiver Power: Idle (500 mW), Transmitting (600 mW)
• Operating Frequency: 2.4 GHz or 900 MHz (see label for frequency)
• FCC ID: OUR-XBEEPRO for 2.4 GHz, or MCQ-XBEE09P for 900 MHz
• Receiver Dimensions: 4½" x 3½" x 2"
• Receiver Weight: ½ lb.
• Operating Temperature Range: −40°F to +140°F (−40°C to +60°C)
STYLE 3600 WIRELESS REMOTE CONTROL
FOR UNIVERSAL I CONTROLLED MONITORS
120315