Temperature Control - Friedrich WallMaster WS Instrucciones De Instalación Y Funcionamiento

"WE" / "WY" models
Model
WE10, WE13, WE16, WY10, WY13
Mode control
Turn the knob clockwise to "HIGH HEAT" for heating with
highest fan speed. Set to "MED HEAT" for heating with me-
dium fan speed. Turn to "LOW HEAT" for heating with the
lowest fan speed. Models designated "WE" only use electric
heating elements. Heat Pumps, "WY" models, use the com-
pressor for heating, au to mat i cal ly switching to electric heating
el e ments only when the outside temperature reaches 43°F.
Turn the knob counterclockwise to "FAN ONLY" for medium
speed without cooling or heating. Turn to "HIGH COOL" for
cooling with the highest fan speed. Turn to "MED COOL"
for cooling with medium fan speed. Set to "LOW COOL" for
cooling with the lowest fan speed. Turn the knob in either
direction to "OFF" to turn the unit completely off.
NOTE: The fan will cycle with the compressor or the heat-
ing element and will not run constantly when in the heating
mode.
920-007-11 (8-05)
Fan
Only
Low
Heat
Med
Heat
High
Heat
MODE
Wait three minutes before restarting
Plug Type
NEMA No. 6-20P

Temperature control

The knob labeled "TEMPERATURE" controls the thermostat
– turn clockwise to set a cooler temperature, coun ter clock wise
to make it warmer.
Low
Cool
Med
Cool
High
Cool Warmer
Cooler
TEMPERATURE
Circuit Rating, Breaker
or Time Delay Fuse
250V-20 AMP
Figure 4
5