Hilti ST 1800­-A22 Manual De Instrucciones página 16

5.4 Fitting / removing the depth gauge (optional)
When driving screws with a sealing washer, use a depth gauge suitable
for the diameter of the sealing washer (accessory). When the depth
gauge is correctly adjusted the screw seal will be correctly compressed.
The depth gauge is attached to the metal construction screwdriver by
way of a snap-on connection and can be simply pulled off or pushed on.
▶ Fit the depth gauge.
5.5 Using the protective cap
When the depth gauge is not fitted, the guard protects the depth gauge
holder from dirt and damage.
▶ Use the protective cap.
5.6 Setting forward or reverse rotation
An interlock prevents switching while the motor is running.
The control switch is locked when the forward/reverse switch is in the
middle position (safety lock).
▶ Set the forward/reverse switch to the desired direction of rotation.
5.7 Setting the torque
▶ Set the desired torque.
5.8 Safe operation
WARNING
Electric shock A fastener coming into contact with a concealed electric
cable may result in electric shock.
▶ Never use the depth gauge or chuck as a gripping area.
Always hold the tool by the grip and/or with the hands on plastic parts
of the casing (in-line grip).
▶ Always hold the tool by the grip and/or with the hands on plastic parts of
the casing.
10 English
Printed: 05.06.2019 | Doc-Nr: PUB / 5293039 / 000 / 04
5
7
8
4
6
2153707
*2153707*