Care | Manual cleaning
5.5.9
Cleaning the mixer
Clean more often depending on the powder used.
* Carry out a mixer rinse
* Open the doors
* Pull the mixing bowl forwards with the handle
* Lift the mixing bowl slightly so that any remaining
water runs out
* Pull off the mixer hose, from the mixing bowl to
the outlet, and take it out of the guide
The mixer's propeller is now visible.
* Clean the propeller with a cloth
* Disassemble the two-part mixing bowl
* Clean both mixing bowl parts and the mixer hose
under warm, running drinking water
* Let the parts dry fully
At the time of reassembly, all openings must point
in the same direction
* Insert the mixer hose into the outlet through the
guide
* Reinsert the mixing bowl until it engages
* Attach the mixer hose to the mixing bowl
Danger of scalding
• If the mixer hose is not firmly connected,
hot water or hot powder-based beverage
can escape unintentionally.
> Attach the mixer hose to the mixing bowl.
92
Animated instructions
w C offee machine
w M ain menu
w C are
w I nstructions
CAUTION
Observe the Safety chapter
w f rom page 57
SCClub short instructions