Commissioning Programme - Schaerer Coffee Club Guía Breve

3.3

Commissioning programme

* Switch on the coffee machine using the on/off
switch.
The coffee machine switches on.
The commissioning programme starts.
* Follow all instructions on the display.
The commissioning programme proceeds
step-by-step through the further
commissioning process via the display.
> Follow the display messages.
• The set values can be changed after
commissioning.
Other instructions
• Connecting milk w C hapter 4.4 page 76
Once the commissioning process has been run in its
entirety and all necessary settings have been made,
the coffee machine restarts. Calibration is performed
automatically.
Risk of burns/
Danger of scalding
• Hot liquid comes out of the outlets during
beverage dispensing. The adjacent
surfaces and outlets get hot as well.
> Do not touch the area under the outlets
during beverage dispensing.
> Do not touch the outlets immediately after
dispensing.
SCClub short instructions
Commissioning | Commissioning programme
IMPORTANT
Changing settings
w S etting
See operating insctructions
CAUTION
Observe the Safety chapter
w f rom page 57
73