Installation Location; Unpacking - Schaerer Coffee Club Guía Breve

Commissioning | Installation location
3.1

Installation location

• The installation location must be dry and
protected from spray water.
• Water, condensation or steam can always
escape from a coffee machine.
> Do not use the coffee machine in the open.
> Set up the coffee machine so that it is
protected from spray water.
> Make sure to set the coffee machine on
a water-resistant surface which is not
sensitive to heat to protect the installation
surface from damage.
3.2

Unpacking

> The packaging material in the box contains
accessories. Do not throw away.
> The water tank and the grounds container
contain spare parts. Remove the spare
parts before commissioning and thoroughly
rinse the grounds container and the water
tank.
> Check whether the coffee machine is
intact. In case of doubt, do not put the
coffee machine into operation and contact
Schaerer Service.
> Therefore, be sure to keep the original
packaging in a safe place should a return
delivery be necessary.
* Unpack the Schaerer Coffee Club and set the
coffee machine on a stable, horizontal surface .
* Observe the technical data.
* Plug the connection cable of the coffee machine
into the respective socket.
72
IMPORTANT
Observe the Warranty chapter
wSee operating insctructions
Technical data
wSee operating insctructions
IMPORTANT
Observe the Warranty chapter
wSee operating insctructions
Accessories and labelling of
machine parts
w p age 67
Technical data
wSee operating insctructions
Technical data
wSee operating insctructions
SCClub short instructions