Tabla de contenido
I Take out the mesh filters, clean them with a small brush and
rinse under running water; if there are lime scale deposits, clean
the filters with a scale remover product.
I Perform the steps in reverse order to put the various ele-
ments back in place.
Warnings and notes
• Ensure that installation has been carried out by qualified
personnel, in full compliance with legal and current na-
tional regulations.
• It is dangerous to use or access the components of the
electrical system while the shower panel is in use.
• After using any "water jet" function, turn off the stop tap. It is ad-
visable to turn the diverter to the "showerhead" position.
• If Ego, Ios, Es and Es Built In panels shower enclosures are sup-
plied with hot water from an economic-type gas boiler with me-
chanical flame adjustment, the boiler may not be able to provide
a continuous water supply at the required temperature. In this
case, if it is not possible to replace the boiler with an electron-
ic-modulation one, it is advisable to get a qualified technician
to lock the flame modulation of the boiler and only use the show-
er panel mixer tap to regulate water temperature.
• The water supply (hot/cold water) must ensure well-balanced
pressures. A considerable difference in pressure may prevent
correct and speedy adjustment of the water temperature.
For all maintenance and/or repair operations that require
the replacement of components, original Jacuzzi
parts must be used, since failure to comply with this regu-
lation will mean that the Manufacturer is not liable for
any damage.
®
spare
31
Tabla de contenido
