Restoring The Original Configuration - SOMFY Maestria WT Manual De Instrucciones

2. 4. 2. Restoring the original configuration
Use universal adjusting cable 9015971 (follow the instructions in the corresponding manual for
connection), or use a non-locking double push-button switch.
Press the adjusting cable "Up" and "Down" buttons simultaneously or the non-locking double push
-
button switch until the driven product moves up and down
once, then again.
The drive is back in its original configuration.
•
2. 4. 3. Questions about the drive?
Observations
The driven product does not
operate.
The driven product stops too
soon.
The end limit setting procedure
does not work a er several
attempts.
Copyright © 2016 Somfy SAS. All rights reserved.
Possible causes
The wiring is incorrect.
The drive's overheating protection
has tripped.
The cable used is not compliant.
The control point is not compatible. Check the compatibility and
The ring is not correctly installed.
The end limits are incorrectly
programmed.
The re-setting procedure has been
disabled.
8s
Check the wiring and modify as
required.
Wait for the drive to cool down.
Check the cable and make sure
that it has 4 conductors.
replace the control point as
required.
Secure the ring correctly.
Reset the end limits.
Consult a Somfy contact.
Images not contractually binding
EN
Solutions
49