Wolf ICBPW482418 Guía De Uso Y Mantenimiento página 14

W O L F
H A LO G E N
All Wolf Pro ventilation hoods and hood liners
have halogen lighting with two settings.
Halogen bulbs are not included with the hood.
H A L O G E N B U L B R E P L A C E M E N T
Wall Hoods: Turn off the ventilation hood
blower and lights. Once the halogen bulb is
cool, use a soft cloth to unscrew the bulb and
replace. Refer to the illustration below.
Hood Liners: To insert halogen bulbs, push
bulb into receptacle and rotate clockwise
1
/
4
counterclockwise
illustration below.
14
P R O V E N T I L AT I O N H O O D
L I G H T I N G
Pro wall hoods, 762 mm, 914 mm and 1067
mm wide require two 220-240 V 50/60 Hz,
50W (maximum), E27, PAR20 halogen bulbs.
1219 mm, 1372 mm, 1524 mm and 1676
mm wide hoods require three 220-240 V
50/60 Hz, 50W (maximum), E27, PAR20
halogen bulbs.
Pro hood liners, 864 mm and 1168 mm
wide require two 220-240 V 50/60 Hz, 50W
(maximum), GU10 halogen bulbs. 1321 mm
wide hood liners require three 220-240 V
50/60 Hz, 50W (maximum), GU10 halogen
bulbs.
turn. To remove, push bulb in and rotate
1
/ turn. Refer to the
4
Light bulb installation—wall hoods
U S E & C A R E
Be sure that the bulb is cool before
replacing. Halogen bulbs get hot instantly
and adjacent parts may retain heat.
H E AT
Wolf Pro 686 mm deep wall hoods are
equipped with two heat lamp locations that
require 220-240 V 50/60 Hz, 250W (maximum),
E27, R125 bulbs. Heat lamp bulbs are not
included with the hood.
To replace, turn off the ventilation hood blower
and lights. Once the heat lamp bulb is cool,
use a soft cloth to unscrew the bulb and
replace.
Be sure that the heat lamp bulb is cool
before touching.
Rotate Clockwise
L A M P S
Push
In
Rotate Clockwise
Light bulb installation—hood liners