Configuring The Panels; Place The Panel In Configuration Mode; Configuring A Panel For Operating A Bow Thruster Or A Stern Thruster; Configuring A Panel For The Steering Position Where The Panel Is Placed - Vetus BOW PRO Serie Instrucciones De Instalación

6.2

Configuring the panels

If several panels are installed configuration is required.
6.3

Place the panel in configuration mode

N.B. The panel must be in the OFF position (if the panel is NOT in the
OFF position, first press the On / Off button once to switch the panel
to the OFF position.
• Press and hold the On / Off button for 10 seconds.
During the first 6 seconds, the buzzer will continuously signal a didi-
didididi ..... (. . . .). Keep pressing the On / Off button. After 10 seconds
the buzzer sounds the signal dididididah (. . . - -). Now the panel is in
configuration mode.
6.4

Configuring a panel for operating a bow thruster or a stern thruster

1
Place the panel in configuration mode, see 6.3.
2
1
2
didahdi ( . − . )
6.5

Configuring a panel for the steering position where the panel is placed

1
Place the panel in configuration mode, see 6.3.
2
1
2
didahdi ( . − . )
With a bow and stern thruster panel, together at the same helm station, the helm station number entered must be the same.
vetus® Installation instructions BOW PRO Series Thrusters: BOWA0651, BOWA0762 and BOWA0902
4
3
4
3
1
The illustrated operations must be performed on EACH panel in-
stalled.
10 seconds
1 x
BLUE
OR
Helm station
2 3 4 1
1 BLUE, flashing
2 RED, flashing
3 BLUE, flashing
RED, quick flashing
4 BLUE and RED,
simultaneously flashing
N
OTE
6 seconds
dididididididid ( . . . . . . )
3 seconds
dididididah ( . . . . − )
Configuration mode
5
1 x
RED
5
Helm station
2 3 4
ENGLISH
1 x
1 x
31
020806.01