Alarm Memory; Acoustic Signallings; Replacing Of The Parts; Cleaning - Hiltron security XR Serie Manual Para El Usuario

security
4.5

Alarm Memory

On desabled system, press "STATO ZONE / MEMORIA ALLARME" (Zone Status / Alarm
Memory) , "ALLARME" (Alarm)
8
system will be shown as below:
- Open Zones LEDs (even if excluded);
- "SIRENE" (Sirens) LED is lit to show the tamper of the XR300 Siren tamper. indicare la
manomissione del tamper della sirena XR300;
- "SENSORI"(sensors) LED is lit to show ad indicare la manomissione del tamper dei sensori
XR200 e rivelatori XR152;
- "24h" LED is lit to show ad indicare la manomissione del tamper della centrale XR500;
- "RETE" (network) LED is lit to show the main power supply absence.
4.6

Acoustic Signallings

Use the following description as a guide for acoustic signalings:
2 Beeps
!
5 Beeps
!
10 Beeps
!
Blanking Beep
!
Continuous Beep
!
5 Maintenance
5.1 Replacing of parts
The XR500 does not include wearing parts, but we suggest you to check the batteries
periodically and to replace every 3 years.
5.2

Cleaning

Use a damp soft cloth for cleaning. Do not use diluents and/or harsh sponge.
5.3

Fuses

F1 Sirens Output
F2 Services Output
LED flashes and all events occurred during the enabling
1
RF Channel tamper (par. 3.1.3.3).
Main power supply absence in the Central Unit (par. 3.1.3.2).
Anomalies of detectors, sensors and radio sirens power supply.
An alarm occurs with enabled sirens.
Alarm for tampering without sirens enabling (the tampering of a
XR300 cause a cycle of alarm only on the same siren).
F type 3A
F type 1A
Operating mode
47