System Code Display - Hiltron security XR Serie Manual Para El Usuario

XR500 - User's Manual
In case of mistakes during the entering of System Code, press
"ESCLUSIONE" (Exclusion) Zone 3 button.
The Programming mode returns to the par.3.1.4.

3.1.4.2 System Code Display

Pressing "ESCLUSIONE" (Exclusion) Zone 4 button, Zones 1, 2
!
and 3 LEDs
Display is enabled.
System Code is displayed as below:
!
- 1 Blink of Zone 1 LED displays the value "1".
- 1 Blink of Zone 2 LED displays the value "0".
During every blink, the Central Unit utters a "BEEP". At the end of
the display of 18 values,
par.3.1.4.
Press "STATO ZONE / MEMORIA ALLARME" (Zone Status / Alarm Memory) button to
enter in the next programming mode: Programming Ending.
40
turn off, and Zone 4 LED lights. The System Code
The Programming mode returns to the
security