Settings; Entering/Exiting Acoustic Signalling; Main Power Supply Absence Alarm On Disabled System; Rf Channel Sabotage Acoustic Signalling - Hiltron security XR Serie Manual Para El Usuario

security
3.1.3

Settings

LED lit
LED blinking
In this mode, "24H" LED is lit and "ALLARME" (Alarm) LED blinks.

3.1.3.1 Entering/Exiting Acoustic Signalling

Pressing "ESCLUSIONE" (Exclusion) Zone 1 button, the
entering/exiting acoustic signalling is activated by the inside BUZZER.
During this function, Zone 1 LED is lit. To desable this function press
again "ESCLUSIONE" (Exclusion) Zone 1 button.
Default setting is "enabled".
3.1.3.2 Main Power Supply Absence Alarm On Enabled System
On enabled system, press
button to start main power supply check.
In case of main power supply absence on enabled system, the
Central Unit utters 5 following beeps (par. 4.6); after 4 hours from mai
power supply absence or after 4 hours from the system enabling in case
of main power supply absence, the allarm occurs.
During this function, Zone 2 LED is lit. P:ress again
"ESCLUSIONE" (Exclusion) Zone 2 button to desable the function.
Default setting is "desabled".

3.1.3.3 RF Channel Sabotage Acoustic Signalling

Press "ESCLUSIONE" (Exclusion) Zone 3 button to enable RF
Channel Check. The Zone 3 LED is lit.
During this function every radio signallings of noise on the
radiofrequency channel will be signalled by 2 following beeps.(par. 4.7).
Press again "ESCLUSIONE" (Exclusion) Zone 3 button to desable.
Default setting is "desabled".
antifurtoriginale.it
ST/BY
RETE
POWER
ASSENZA RETE MAIN POWER
INSERITO
ARMED
ALLARME
ALARM
FLASH:
MEMORIA ALLARME
MEMORY ALARM
XR500
"ESCLUSIONE" (Exclusion) Zone 2
24h
CENTRALE
CENTRAL
SENSORI
STATO ZONE
SENSORS
ZONE STATE
SIRENE
SIRENS
RX / TX
MEMORIA
ALLARME
ALARM
MEMORY
Programmazione
ZONE CONTROL
ON FLASH
ZONA APERTA ZONA ESCLUSA
ZONE ESCLUSED
ZONE OPENED
OFF LAMP: ZONA
ZONA CHIUSA ALLARMATA Zone alarmed
CLOSED ZONE
E X C L U S I O N
37