Operating Procedures; Front Panel - Hiltron security XR Serie Manual Para El Usuario

security
4

Operating Procedures

4.1

Front Panel

1
Yellow LED - ALLARME (alarm)
Lit alarm event
Quick blinking programming mode
Flash alarm memory (see
2
Green LED - INSERITO (enabled)
Lit desabled system
Blinking during th exiting time
Flash enabled system
3
Green LED - RETE (network)
Lit main power supply presence
Blinking (with button pressed)
8
alarm memory in case of main
power supply absence
Flash main power supply absence
4
Red LED - SIRENE (sirens)
Lit XR300 Siren main power supply
absence
Blinking alarm memory siren tamper
5
Red LED - SENSORI (sensors)
Lit one or more flat batteries in the
XR200/XR152 sensors.
Blinking alarm memory XR200/XR152
sensors tamper
6
Red LED - 24h
Lit XR500 Central Unit is open
Blinking (with button pressed)
8
alarm memory XR500 Central Unit
tamper.
Flash alarm memory XR200/XR152
sensors tamper.
2 3
1 4 5
antifurtoriginale.it
ST/BY
RETE
POWER
ASSENZA RETE MAIN POWER
INSERITO
ARMED
ALLARME
ALARM
XR500
)
8
6
24h
CENTRALE
CENTRAL
SENSORI
STATO ZONE
SENSORS
ZONE STATE
SIRENE
SIRENS
FLASH:
MEMORIA ALLARME
RX / TX MEMORIA
MEMORY ALARM
ALLARME
ALARM
MEMORY
Green LED - RX/TX
Displays reception/transmission activity of the Central
Unit to all radio devices connected.
MEMORIA ALLARME (alarm memory) button
8
On desable system, if the
button
enabling, for which following LEDs fblink:
- O pen Zones LEDs (even if excluded);
- "SIRENE" (sirens) LED to show the sabotage of
XR300 Siren tamper;
- "SENSORI" (sensors) LED ato show the sabotage of
XR200 sensors and XR152 detectors tamper ;
- "24h" LED to show the sabotage of XR500 Central
Unit;
- "RETE" (network) LED to show the main power
supply absence.
Red LED - ZONE 1 Status Control
9
Lit
Turn off
Flash
Red LEDs - ZONE 2, 3 and 4 Status Control
10 12
Lit for 3 sec
Turn off
Flash
EXCLUDING/INCLUDING Zones buttons
13 16
On enabled system, press this buttons to select the
zone you want exclude; the LED of ecluded zone starts
to flash. If the zone is open, the LED turn off for some
seconds. Press again the button to include the zone.
7 8 10
9
ZONE CONTROL
ON FLASH
ZONA ESCLUSA
ZONA APERTA
ZONE OPENED ZONE ESCLUSED
OFF LAMP: ZONA
ALLARMATA
ZONA CHIUSA
CLOSED ZONE
E X C L U S I O N
1
to display all events occurred during the system
Zone 1 open
Zone 1 closed
Zone 1 excluded
Zone open
Zone closed
Zone excluded
Funzionamento
11 12
Zone alarmed
13
14
15
16
LED flashes, press this
43