System Configuration And Wiring; Zone 1 (Wired) - Hiltron security XR Serie Manual Para El Usuario

XR500 - User's Manual
2.4

System Configuration and Wiring

Refer to descriptions below for connecting the clamps of XR500:
1 - 2 13Vcc
1 - 3 13Vcc
4 - 5 13Vcc
dialer enabling.
5 - 6 13Vcc
siren. In alarm condition this voltage drops.
7 - 8 Immediate/delayed
9 - 10 Enabling/disabling optional command systems (monostable modality with
contact).
2.4.1

Zone 1 (wired)

Refer to pictures below for the connection of Zone 1, or rather of the wired zone. This zone
is delayable, so we suggest you to assign it at the door-way.
CAUTION!
If the Zone 1is not used, jumper the clamps (7) and (8) "Z1".
32
1 2 3 4 5 6 7 8 9 10
output voltage. Maximum current supplied:
o utput oltage v
output voltage in alarm condition for additional sirens and telephone
regular output voltage for the charge of optional self-powered SA310
Zon 1. e
C205
on enabled system for telephone dialer operating.
If you don't use, you must jumper these clamps.
2S
security
400mA max.