To Stop Engine; Warm Engine Start; Idling/Carburetor Adjustment - McCulloch MT3025 Manual Del Usuario

For Parts Call 606-678-9623 or 606-561-4983 For Parts Call 606-678-9623 or 606-561-4983

6-2. TO STOP ENGINE

1. Release throttle trigger. Let engine return to idle. Move
ignition switch (A) to the " STOP
ping engine. (Figure 6-2A).
A

6-3. WARM ENGINE START

1. Move ignition switch to the "RUN (I)" position.
2. Place choke in RUN " " position (Figure 6-3A).
3. Pull starter rope briskly until engine starts, but no
more than 3 times.
4. Grasp throttle handle firmly while depressing safety
trigger and squeeze throttle trigger to FULL position.
Keep throttle at FULL position until engine runs
smoothly.
5. If engine fails to start, use "starting a cold engine" pro-
cedure.
6 - OPERATING INSTRUCTIONS
" position for stop-
6-2A
6-3A
www.mymowerparts.com www.mymowerparts.com

6-4. IDLING/CARBURETOR ADJUSTMENT

1. Occassionally, due to atmospheric conditions such as
altitude it might be necessary to make slight adjustment
to idle speed.
2. Insert phillips or flat screwdriver into access hole A (fig-
ure 6-4A). Turn 1/8 turn clockwise to increase idle
speed and 1/8 turn counterclockwise to decrease idle
speed.
A
6-4A
10