Parts List - Hama 00049536 Guia Del Usuario

Parts list:

a) Adapter for ceiling bracket to wall bracket (1)
b) Ceiling bracket (1)
c) Extension arm for ceiling bracket (1)
d) Chrome-look decorative cover cap for bracket extension,
e) Fixing screw for ceiling bracket M 8x20 (1)
f) Securing screw M 8x65 (1)
g) Nut for securing screw M 8 (1)
h) Fastening screws for adapter and wall bracket M 8x 20 (2)
i) Nuts for fastening screws M 8 (2)
1. Preparing to mount the ceiling bracket
Use the ceiling bracket (b) as a template to mark the 4 holes
to be drilled on the ceiling. Secure the ceiling bracket to the ceiling;
use installation material suitable for your ceiling only. Attach the
decorative cover cap (d) onto the extension arm (c).
2. Mounting the adapter for the ceiling bracket to the wall bracket
Attach the adapter of the ceiling module to the plasma panel bracket by securing
the two holes of the plasma bracket and the holes on the adapter unit with
the fastening screws (h). Ensure that the heads of the screws point towards
the bracket module.
3. Mounting the ceiling module to the plasma display bracket
To integrate the ceiling module with the plasma bracket, fi rst insert the extension arm of the ceiling module (c)
through the gap provided for it in the adapter unit.
Then connect the ceiling module and the extension arm by aligning the two at the required height between
approx. 60 cm and 100 cm and securing them with the locking screw.
4. Adjusting the rotating device of the adapter
You can rotate the bracket freely through 360°. Use the fi xing
screw (e) to secure it in the required position.
5. Installing the TV set on the bracket
For instructions on mounting the TV set to the bracket,
please consult the assembly instructions of the
respective brackets.
f)
h)
a)
i)
b)
g)
a)
e)
c)
d)
6