Enter the current remote enquiry PIN number and confirm with "OK".
Then enter the new, four-digit PIN and confirm with "OK".
Enter the new PIN again. Confirm again with "OK".
Displays on the base station
The display of the base station shows important information about the status
of your answering machine.
Display
Meaning
empty
The base station is not connected properly to the mains.
– –
The answering machine is switched off.
0–XX
The answering machine is switched on.
"XX": Number of stored messages
1–XX
Answering machine is switched on, and there is at least one
(flashes)
new message.
1–XX/Ao
The answering machine is switched on, the answering mode is
set to "Reply only".
rA (flashes) Answering machine is being used by a handset or an external
telephone.
E (flashes)
General error messages.
F (flashes)
The memory is full.
52