Tabla de contenido
LCD Monitor
Écran ACL
Monitor LCD
SET
Press for 3 seconds — All print
Press for 5 seconds — All cancel
Touche maintenue enfoncée durant 3 secondes :
impression de toutes les données.
Touche maintenue enfoncée durant 5 secondes :
effacement de toutes les données.
Presione durante 3 segundos — Impresión completa
Presione durante 5 segundos — Cancelación de la
selección
170
Function button
Touche de fonction
Botón de función
+/– buttons
Touches (+/–)
Botones +/–
OK
3
OK button
Touche OK
Botón OK
E
RANDOM PRINT
You can select a series of pictures to be direct-
printed to the P-300 printer.
1
Connect the camera with the printer, turn on the power,
then press the Function button in the Display mode to
select the Random Print mode.
2
Select frames with the +/– buttons and press the OK
button at each picture to be printed.
When the OK button is pressed for three seconds, the
camera produces a beep sound and enters the All-Frame
print mode. When the button is held down for another two
seconds, the camera produces the beep sound again and
erases the selection data.
3
Enter the number of copies to be printed on the printer,
then press the DIRECT PRINT button to start printing.
See page 164 for connection to the printer.
Note:
This mode is available only when the camera is
connected to the P-300 printer.
The data for the Random Print are stored in the
card even after printing.
Canceling the Print mode or turning off the
power erases the Random Print request.
The use of the optional AC adapter is
recommended.
Tabla de contenido
