Tabla de contenido
Menu button
Touche de menu
Botón de menú
LCD Monitor
Écran ACL
Monitor LCD
NEXT
158
Control panel
Écran de
commande
Panel de control
S ET
+/– buttons
Touches (+/–)
Botones +/–
OK button
Touche OK
Botón OK
E
CARD FORMAT
1
Press the Menu button in the Display mode, and select
Card format.
When the card needs to be formatted, the Card error
indicator lights on the control panel, and the camera
automatically enters the Card format mode.
2
Select Card format
with the – button.
3
Press the OK button to start formatting (the Card error
indicator blinks). Press the LCD monitor ON/OFF button to
cancel the format.
4
When the card formatting is done, the Card error indicator
will disappear.
Note:
Formatting the card erases the existing data,
including pictures which have been write-
protected from the camera. Be careful not to
erase important data when formatting a recorded
card.
Formatting is not engaged when the write-protect
adhesive seal is placed on the card.
Non-Olympus brand cards or cards formatted
from or used in a computer must be formatted by
the camera. These cards may take longer to
record than recommended Olympus brand cards.
Tabla de contenido
