Operator Safety Instructions - Clarke FM-1700 Libro De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

revised 1/2014

OPERATOR SAFETY INSTRUCTIONS

DANGER !
Severe bodily injury or death can occur to you or other personnel if the DANGER statements found on this machine or in
this Owner's Manual are ignored or are not adhered to. Read and observe all DANGER statements found in this Owner's
Manual and on your machine.
WARNING !
Injury can occur to you or to other personnel if the WARNING statements found on your machine or in this Owner's Manual
are ignored or are not adhered to. Read and observe all WARNING statements found in this Owner's Manual and on your
machine.
CAUTION !
Damage can occur to the machine or to other property if the CAUTION statements found on your machine or in this Owner's
Manual are ignored or are not adhered to. Read and observe all CAUTION statements found in this Owner's Manual and
on your machine.
DANGER !
Failure to read the Owner's Manual prior to operating or attempting any service or maintenance procedure to your
machine could result in injury to you or to other personnel; damage to the machine or to other property could occur
as well. You must have training in the operation of this machine before using it. If you cannot read English, have this
manual explained fully before attempting to operate this machine.
To reduce the risk of fi re, use only commercially available fl oor cleaners and waxes intended for machine application.
Risk of explosion. Floor sanding can result in an explosive mixture of fi ne dust and air. To reduce risk of explosion, use
fl oor sanding machine only in well-ventilated area.
Operating a machine that is not completely or fully assembled could result in injury or property damage. Do not operate
this machine until it is completely assembled. Inspect the machine carefully before operation.
Electrocution could occur if maintenance and repairs are performed on a unit that is not disconnected from the power
source. Disconnect the power supply before attempting any maintenance or service. Always remove the electrical plug
from the electrical outlet before changing the brush, pad or other attachment and before leaving the machine.
Using a machine with a damaged power cord could result in an electrocution. Do not use the machine if the power cord
is damaged. Do not use the electrical cord to move the machine.
Clarke
Operator's Manual FM-1700, 2000
®
EN
ENGLISH
FORM NO. 56091119 - 3
Tabla de contenido
loading

Este manual también es adecuado para:

Fm-200001014a01016a

Tabla de contenido