Replacing The Oven Light; Broiler Pan And Grid (Sold Separately); Oven Racks - KENMORE ELITE 721.7603 Serie Guía De Uso Y Cuidados

Estufa de gas
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

replacing the Oven Light

The oven light is a standard 40-watt appliance bulb. It will turn on
when the oven door is open. When the oven door is closed, press the
key to turn the light on or off.
WARNING
y Make sure that the oven and bulb are cool.
y DISCONNECT the electrical power to the range at the main
fuse or circuit breaker panel. Failure to do so can result in
severe personal injury, death, or electrical shock.
1
Unplug the range or disconnect power.
2
Turn the glass bulb cover in the back of the oven
counterclockwise to remove.
3
Turn the bulb counterclockwise to remove from socket.
4
Insert the new bulb and turn it clockwise.
5
Insert the glass bulb cover and turn it clockwise.
6
Plug in the range or reconnect the power.
Broiler Pan and Grid
(sold separately)
NOTE
Remove the broiler pan and grid from the oven before running
the Self Clean cycle.
1
After broiling, remove the broiler pan from the oven. Remove the
grid from the pan.
2
Carefully pour out the grease from the pan into a proper
container.
3
Wash and rinse the broiler pan and grid in hot water with a soap-
filled or plastic scouring pad. If food has burnt on, sprinkle the
grid with cleaner (while hot) and cover it with wet paper towels
or a dishcloth. Soaking the pan will remove burnt-on foods. Both
the broiler pan and grid may be cleaned with a commercial oven
cleaner. Both the broiler pan and grid can also be cleaned in a
dishwasher.

Oven racks

Remove the oven racks before operating the Self Clean cycle.
1
Food spilled into the tracks could cause the racks to become
stuck. Clean racks with a mild, abrasive cleaner.
2
Rinse with clean water and dry.
NOTE
If the racks are cleaned using the Self Clean cycle (not
recommended), the color will turn slightly blue and the finish will
become dull. After the self clean cycle is complete, and the oven
has cooled, rub the sides of the racks with wax paper or a cloth
containing a small amount of vegetable oil. This will make the
racks glide more easily into the rack tracks.
43
CARE AND CLEANING

Capítulos

Tabla de contenido
loading

Tabla de contenido